HP Envy Pro 6422 Troubleshooting

HP Envy Pro 6422 Printer Off-line Error:

1. If the Envy6422 printer is not on-line.
2. Turn the HP Envy pro 6422 printer off.
3. Turn on the printer.
4. Unplug and Re-plug the Ethernet cable into your Internet port.

HP Envy Pro 6422 Unresponsive USB Connection:

1. Make sure that your HP Envy pro 6422 printer is plugged into the power supply and turned on.
2. Remove the Envy6422 USB cable from the computer.
3. Go to Control panel settings.
4. Choose the option “Devices and printers“.
5. Remove the HP Envy6422 printer from the list.
6. Restart your computer.
7. Connect the HP Envy pro 6422 USB cable to the computer.

HP Envy Pro 6422 Printer Will Not Connect To Wi-Fi: If your HP Envy pro 6422 printer is not working, then software installation may be necessary. Follow the instructions and install the printer software In short.

1. Before installing the Envy6422 printer software, make sure your computer and the router are turned on.
2. Confirm the computer is connected to the same wireless network.
3. Turn on the HP ENVY6422 printer.
4. Follow the instructions and install the printer software.

HP ENVY6422 Printer Driver UnavailableIn case your ENVY6422 printer driver unavailable. Follow with the below steps to fix the driver issue.

1. Open the Easy-start driver.
2. Select the scan now option.
3. Checks for any other driver installed on your computer.
4. Choose the update all option.
5. Then, the drivers installed in your computer will update at the time.
6. Next, Turn off the wireless router, and the HP Envy pro 6422 printer device.
7. Then, Power off the computer and disconnect the cable.
8. Now, wait for 10 seconds.
9. Then turn on the wireless router, HP the Envy pro 6422 printer, and the computer.
10. Verify that your HP Envy pro 6422 printer is connected to the wireless network.
11. Confirm the HP Envy pro 6422 printer software installed.
12. By these steps, the printer driver will get the fix.

Steps to Fix HP Envy Pro 6422 Printer won’t Scan Follow these steps to resolve the scan issue In short. Solution 1:

1. Turn off your HP Envy pro 6422 printer device.
2. Check the power cable of the HP printer device connected.
3. Close all the running or active programs.
4. Restart your computer.
5. Turn on your HP printer device.
6. Try to scan the document or Photo.

Solution 2:

1. Uninstall the printer software.
2. Now, Reinstall the HP ENVY6422 software.
3. Also, check the connection status of network and printer.
4. Now, try to scan your desired files.