How to Fix HP Printer Error Code

If the HP printer displays an error message, you have to resolve those error to continue printing. Every time you see an error code displayed on the screen, reboot your device. Most error code will fade off after restarting your device while some error code are not. Different HP printer models will prompt unique error codes. Here, you will see some description and techniques to fix the error code in HP printer.

Type-1 : Error Code 02 – A warming up error
Type-2 : Error Code 10 – Supplies Memory Error
Type-3 : Error Code 11 – Paper Out
Type-4 : Error Code 20 – Memory Overflow
Type-5 : Error Code 65 – Scan Buffer Error
Type-6 : Error Code 99 – Firmware Upgrade

Error Code 02 – A warming up error

What is it?

When there is a problem with the driver or printer cable, this type of error code display on your screen.

Troubleshooting Steps:

Power off your HP printer and detach all the printer cables from it.
Now, wait for some time and reconnect all the printer cables to restart your HP printer.
If the error code is still prompting on your screen, then the problem might be with the printer hardware.
In this case, you should contact a printer technician.

Error Code 10 – Supplies Memory Error

What is it?

This type of error code will occur when you use a third-party toner or non-HP ink cartridges.

Troubleshooting Steps:

Turn your printer on and off to get the problem resolved.
If the error persists, remove and install the toner or ink cartridge again.
Are you still experiencing the same error code? Then replace the toner or ink cartridge with an original HP ink cartridges.

Error Code 11 – Paper Out

What is it?

The error code 11 will occur if the input paper tray is out of paper or if the printing sheets face damage on the edges.

Troubleshooting Steps:

Check whether you have chosen a flat surface to place your HP printer.
Now, open the input paper tray and check if it has a enough volume of printing sheets in it.
Next, check whether the input paper tray is free from specks of dirt and paper clots.
Look to that all the printing sheets are without damages on the edges.
Now, try to print and check if the error code is showing again on the display screen or not.

Error Code 20 – Memory Overflow

What is it?

When the print job exceeds, you will experience this error code on the control panel.

Troubleshooting Steps:

Before printing, you will have to try to reduce or compress the file size.
If the problem again prompts, then the printer problem might be with the printer driver.
Try to reinstall the latest driver version to avoid the error code.

Error Code 65 – Scan Buffer Error

What is it?

The scan buffer error might be due to an error in the DC controller, firmware, or more.

Troubleshooting Steps:

You will have to turn off and reboot your HP printer to check if the error code fades off.
If you find the same error code again on the screen, contact a printer technician for help.

Error Code 99 – Firmware Upgrade

What is it?

A flash firmware failure will cause this error code.

Troubleshooting Steps:

Upgrade the firmware to the latest version.
If the same problem continues, then the problem might be with the formatter board.
Call a printer technician in this case to resolve the error code.