Brother MFC-J4335DW Wireless Setup

Download the Latest Brother MFC-J4335DW driver for Windows 10, 8.1, 8, 7 OS versions. The printer drivers are available for Mac OS Mojave, High Sierra, and Mac OS X El Capitan, Yosemite, Mavericks and Mountain Lion. Find the Version of your OS and install Brother MFC-J4335DW printer using the Manual.

Brother MFC-J4335DW WiFi Setup

  Follow the below steps to setup the Brother MFC-J4335 DW printer to a wireless network.
  1. Make sure you have an active wireless network connection before you proceed with the WiFi setup.
  2. Power up the Brother printer and the device.
  3. During the installation of the driver, choose the connectivity option.
  4. Select Wireless Network Connection and click ‘Next’ to proceed.
  5. Within a few seconds, a list of available wireless networks will pull up.
  6. Choose the wireless connection and key in the network credentials.
  7. Confirm the connection and proceed with the installation process.

Brother MFC-J4335DW Wireless Setup Using the Setup Wizard from Your Computer

  1. Begin the process by downloading and installing the Brother MFC-J4335DW driver from the Brother printer’s Website.
  2. Proceed with the on-screen instructions.
  3. You will find a prompt with the connectivity preference of connecting using a Wireless Network and USB.
  4. Choose the Wireless Network Connection, WiFi and click ‘Next’.
  5. Key in the WiFi credentials to authorize the connection.
  6. Continue to follow the on-screen instructions.
Within a few steps, the printer will now be connected to a Wireless Network.

Brother MFC-J4335DW WiFi Protected Setup (WPS)

The connection between the Brother MFC-J4335DW printer and the device can be done quickly using the WPS pin method. All you have to do is follow the below steps.

  1. Go over to the printer’s display and click Network.
  2. Followed by this choose WiFi and then WPS Pin Code and click OK.
  3. A number will begin to be displayed on the printer’s display.
  4. Note that the WPS Pin will only remain for a few minutes.
  5. When the number is displayed the WPS system will begin searching for wireless access or router.
  6. On the device, go to the WPS settings page and enter the 8-digit pin.
  7. Proceed to follow the on-screen instructions.

Brother MFC-J4335DW WiFi Direct setup using the Push Button Method

Use the Push Button method to connect to the Brother printer if it does not have a screen. This process is simple.

  1. Move over to the printer and try to locate the WPS button. If you’re experiencing difficulty, check the user manual.
  2. On locating the WPS Button, press and hold it for a few minutes. Notice that a green or blue light will flicker.
  3. Meanwhile, locate the WPS button on the WiFi router. Press and hold it for a few seconds.
  4. Both should be held at the same time. Proceed to do the same until the connection is established.

Brother MFC-J4335DW WiFi Direct Setup using manually

  1. Go over to the printer’s display and click the Settings option.
  2. Continue to click the Network option.
  3. Followed by this, click WiFi Direct and then select Manual.
  4. The machine will display all the available networks.
  5. Choose the desired network and enter the password.
Scroll to Top

Get Instant Support

Chat With Our Expert

+1 855 429 0726

Technical Support