Brother DCP-1612 Troubleshooting

Brother DCP-1612 Printer Off-line Error:

1. If the printer is not on-line.
2. Turn off the Brother DCP-1612 printer.
3. Turn on the printer.
4. Unplug and Re-plug the Ethernet cable into your Internet port.

Brother DCP-1612 Unresponsive USB Connection:

1. Make sure that your Brother DCP-1612 printer is plugged into the power supply and turned on.
2. Remove the USB cable from the computer.
3. Go to Control panel settings.
4. Choose the option “Devices and printers“.
5. Remove the Brother DCP-1612 printer from the list.
6. Restart your computer.
7. Connect the Brother DCP-1612 Printer with USB cable to the computer.

Brother DCP-1612 Printer Will Not Connect To Wi-Fi: If your printer is not working, then software installation may be necessary. Follow the instructions and install the printer software In short.

1. Before installing the printer software, make sure your computer and the router are turned on.
2. Confirm the computer is connected to the same wireless network.
3. Turn on the Brother printer.
4. Follow the instructions and install the printer software.

Brother DCP-1612 Printer Driver UnavailableIn case your  printer driver is unavailable. Follow with the below steps to fix the driver issue.

1. Open the Easy-start driver.
2. Select the scan now option.
3. Checks for any other driver installed on your computer.
4. Choose the update all option.
5. Then, the drivers installed in your computer will update at the time.
6. Next, Turn off the wireless router, and the Brother DCP-1612 printer device.
7. Then, Power off the computer and disconnect the cable.
8. Now, wait for 10 seconds.
9. Then turn on the wireless router, Brother DCP-1612 printer, and the computer.
10. Verify that your Brother DCP-1612 printer is connected to the wireless network.
11. Confirm the Brother DCP-1612 printer software installed.
12. By these steps, the printer driver will get the fix.

Steps to Fix Brother DCP-1612 Printer won’t Scan Follow these steps to resolve the scan issue In short. Solution 1:

1. Turn off your Brother DCP-1612 printer device.
2. Check the power cable of the Brother printer device connected.
3. Close all the running or active programs.
4. Restart your computer.
5. Turn on your Brother printer device.
6. Try to scan the document or Photo.

Solution 2:

1. Uninstall the printer software.
2. Now, Reinstall the Brother DCP-1612 software.
3. Also, check the connection status of network and printer.
4. Now, try to scan your desired files.